Zhongtuo SX20 18m/min C Z Purlin Roll Forming Machine Full Automatic Interchange CZ Machine

Zhongtuo C Z purlin roll forming machine for automatic C/Z profiles from 1–3 mm steel. Pre-punching, pre-cutting, PLC control and adjustable sizes.

Modern steel construction requires structural components that combine strength, dimensional accuracy, and efficient production. For this reason, the C Z Purlin Machine is designed to manufacture C and Z-shaped steel purlins for roofing systems, steel buildings, warehouses, solar structures, and other structural applications.

In addition, the C Z Purlin Roll Forming Machine integrates decoiling, leveling, pre-punching, pre-cutting, roll forming, post-cutting, and product support into one automated production line. Furthermore, its adjustable forming system allows the machine to produce different C and Z purlin sizes without replacing the complete set of forming rollers. As a result, manufacturers can switch between different profile specifications more efficiently.

For manufacturers handling multiple purlin specifications, the C Z Purlin Roll Forming Machine Full Automatic configuration provides an efficient way to reduce manual operation and maintain consistent production quality. Moreover, the automated production process helps coordinate punching, cutting, forming, and finished-product handling. Therefore, this machine is suitable for manufacturers looking for a flexible solution for different C/Z purlin production requirements.

SX20 automatic C Z purlin roll forming machine full production line
SX20 automatic C Z purlin roll forming machine full production line

Adjustable C/Z Profile Production

One of the main advantages of this CZ Profile Roll Forming Machine is its flexible profile range. In particular, the forming system is designed to produce both C and Z purlins while allowing manufacturers to adjust the required profile dimensions according to different construction projects.

The available profile range includes:

Profile Width Height Lip
C Purlin 80–300 mm 30–80 mm 10–20 mm
Z Purlin 120–300 mm 30–80 mm 10–20 mm

In addition, the machine can support 90° and 135° forming configurations, depending on the required profile design. As a result, manufacturers can select the appropriate forming configuration for different structural applications.

Moreover, the adjustable design allows the machine to accommodate different purlin dimensions within its specified range. This means manufacturers can produce various C and Z sections on the same production line instead of using separate machines for each fixed size.

Therefore, this flexibility makes the equipment particularly suitable for manufacturers that produce different structural steel sections. Instead of focusing on only one fixed purlin size, the CZ Profile Roll Forming Machine provides a more adaptable solution for projects with varying profile requirements.

Hydraulic decoiler and CZ purlin forming machine system
Hydraulic decoiler and CZ purlin forming machine system

Full Automatic C/Z Purlin Production Line

The production process of the CZ Purlin Machine can be arranged as:

Decoiling → Leveling → Pre-Punching → Pre-Cutting → Roll Forming → Post-Cutting → Product Support

The PLC control system coordinates each stage to ensure a smooth and continuous production process.

First, the pre-punching system processes holes before the steel strip enters the roll forming section. As a result, hole positions can be maintained accurately according to the programmed requirements, which is important for structural installation.

Next, the pre-cutting system cuts the material according to the programmed production requirements before forming. In this way, the machine can handle customized production orders while helping reduce unnecessary material waste.

After punching and cutting, the steel strip enters the roll forming section. During this stage, multiple roller stations gradually shape the strip into the required C or Z profile. Meanwhile, the PLC control system coordinates the forming process to maintain stable production and consistent profile dimensions.

Finally, after the required profile is formed, the post-cutting system cuts the finished C or Z purlin to the preset length. Then, the product support system helps transfer and collect the finished profiles for the next handling or packaging process.

This coordinated production process enables the Full Automatic C/Z Purlin Production Line to complete punching, cutting, forming, and product handling in a continuous sequence. Therefore, it is suitable for efficient production of C and Z purlins for different structural applications.

CZ purlin interchangeable roll forming machine 3.0mm steel profile
CZ purlin interchangeable roll forming machine 3.0mm steel profile

Interchange C/Z Purlin Machine Without Frequent Roller Changes

The SX20 configuration allows operators to adjust the required profile dimensions through the PLC control system. This reduces the need for frequent manual adjustments and makes switching between different production requirements more convenient.

The machine is suitable for producing:

  • C-shaped steel purlins
  • Z-shaped steel purlins
  • Different profile widths
  • Different profile heights
  • Different lip dimensions
  • Customized punching patterns
  • Customized cutting lengths

This makes the CZ Purlin Roll Forming Machine particularly useful for steel fabrication companies that receive orders with different specifications.

Pre-Punching and Pre-Cutting System

A major feature of the machine is the integrated pre-punching and pre-cutting system.

The hydraulic punching unit creates holes at programmed positions before the material enters the forming section. Hole spacing, quantity, and production length can be controlled through the PLC system.

Meanwhile, pre-cutting allows the machine to process customized lengths according to the production program.

The system can automatically manage:

  • Punching positions
  • Hole spacing
  • Cutting length
  • Production quantity
  • Batch production
  • C/Z profile parameters

By storing production parameters in the control system, operators can switch between different orders more efficiently.

hydraulic pre punching system for C Z purlin machine
hydraulic pre punching system for C Z purlin machine
automatic C Z purlin forming machine with PLC control system
automatic C Z purlin forming machine with PLC control system

High-Strength Roll Forming for 1.0–3.0 mm Steel

The CZ Roll Forming Machine is designed for steel materials with thicknesses from 1.0 to 3.0 mm.

Compatible materials include cold rolled steel, galvanized steel, and hot rolled steel. Typical material grades include Q195, Q235B, and ST52.

The forming section uses approximately 18–20 roller stations, depending on the final machine configuration.

Technical Specifications of the C/Z Purlin Machine

Item Specification
Machine Type C/Z Purlin Roll Forming Machine
Model SX20
Product C & Z Steel Purlins
Material Cold Rolled / Galvanized / Hot Rolled Steel
Thickness 1.0–3.0 mm
Material Grade Q195 / Q235B / ST52
C Purlin Width 80–300 mm
C Purlin Height 30–80 mm
C Purlin Lip 10–20 mm
Z Purlin Width 120–300 mm
Z Purlin Height 30–80 mm
Z Purlin Lip 10–20 mm
Forming Speed 15–18 m/min with punching
Maximum Speed Up to 30 m/min without punching
Roller Stations 18–20
Shaft Diameter 75 / 90 mm
Main Motor 22 kW Servo Motor
Hydraulic Power 11 kW
Transmission Chain & Gear
Control System PLC
Voltage 380V / 50Hz / 3 Phase
Decoiler 5T Standard / 10T Hydraulic Optional

Machine specifications can be customized according to the customer’s required profile, material thickness, punching pattern, and production capacity.

hydraulic decoiler 5 ton for C Z purlin roll forming line
hydraulic decoiler 5 ton for C Z purlin roll forming line
high speed CZ purlin roll forming production
high speed CZ purlin roll forming production

Applications of C and Z Purlin Profiles

C and Z purlins are widely used as secondary structural members in steel construction.

Typical applications include:

Steel Structure Buildings
C/Z purlins can be used for roof and wall framing in workshops, warehouses, factories, and agricultural buildings.

Solar Structures
Certain C and Z sections can be used as structural members in photovoltaic mounting systems.

Roofing Systems
Purlins provide support for roof panels and transfer loads to the main structural frame.

Prefabricated Buildings
Cold-formed purlins are suitable for lightweight and modular construction systems.

Industrial Structures
C/Z profiles can also be used in various structural frameworks and storage-related applications.

C and Z purlin roll forming machine for steel structure building
C and Z purlin roll forming machine for steel structure building

Hot Selling CZ Purlin Roll Forming Machine for Global Markets

The C Z Purlin Machine is a practical solution for manufacturers producing structural steel purlins in different sizes and configurations. By combining automatic C/Z profile adjustment, pre-punching, pre-cutting, servo-driven forming, and PLC control, the machine provides a flexible production solution for modern steel constructio.

Frequently Asked Questions About C/Z Purlin Roll Forming Machine

1. What materials can the C/Z purlin roll forming machine process?

The machine can process cold rolled steel, galvanized steel, and hot rolled steel. Typically, the standard material thickness range is 1.0–3.0 mm, with common material grades including Q195, Q235B, and ST5. Therefore, the machine can accommodate different steel materials commonly used for structural purlin production.

2. What is the production speed of the CZ purlin machine?

The standard production speed is approximately 15–18 m/min when punching. However, the machine can reach up to 30 m/min without punching. In addition, the actual production speed depends on factors such as profile size, material thickness, punching pattern, and machine configuration.

3. Does the C/Z purlin machine have automatic punching and cutting?

Yes. The full automatic configuration integrates pre-punching, pre-cutting, roll forming, and post-cutting into one continuous production process. Meanwhile, the PLC control system manages punching positions, cutting lengths, production quantities, and other production parameters. As a result, the machine can reduce manual intervention and improve production efficiency.

4. What sizes of C and Z purlins can the machine produce?

The machine can produce C purlins with widths of 80–300 mm, heights of 30–80 mm, and lips of 10–20 mm. For Z purlins, the available width is 120–300 mm, the height is 30–80 mm, and the lip is 10–20 mm. Furthermore, customized dimensions can be discussed according to specific project requirements, allowing the production line to better match different structural applications.

Reviews

There are no reviews yet.

Be the first to review “Zhongtuo SX20 18m/min C Z Purlin Roll Forming Machine Full Automatic Interchange CZ Machine”

Your email address will not be published. Required fields are marked *