Zhongtuo Metal Roof Ridge Cap Roll Forming Machine Roof Ridges Making Machine

Zhongtuo Metal roof ridge cap roll forming machine for PPGI and GI sheets. Produce accurate roof ridge caps with automatic forming and hydraulic cutting.


A metal roof ridge cap roll forming machine provides an efficient solution for producing durable and accurately shaped ridge caps for modern roofing systems. Designed for galvanized steel, PPGI, and similar metal coils, this equipment continuously forms raw metal sheets into customized ridge cap profiles with stable dimensions and a clean surface finish.

For roofing manufacturers in Ghana, this metal roof cap machine combines continuous roll forming, hydraulic cutting, PLC control, and flexible decoiler options in one production line. With a forming speed of approximately 15 m/min, it can process common roofing materials from 0.25–0.8 mm and support stable, continuous production.

metal roof ridge capping machine
metal roof ridge capping machine
metal roof ridge cap roll forming machine
metal roof ridge cap roll forming machine

1. Efficient Solution for Metal Roof Ridge Capping

A ridge cap covers the highest point of a pitched roof where two roof slopes meet. It helps protect the roofing structure from rainwater, dust, and wind while giving the finished roof a neat appearance.

The metal roof ridge capping machine gradually bends the incoming steel coil through multiple forming stations. Instead of performing the bending process manually, the machine uses precision rollers to form the material continuously and consistently. After forming, the hydraulic cutting system cuts the finished ridge caps to the programmed length.

This production method allows roofing manufacturers to reduce repetitive manual work while maintaining more consistent dimensions.

The machine is suitable for producing ridge caps for:

  • Industrial steel buildings
  • Warehouses and workshops
  • Commercial buildings
  • Agricultural structures
  • Residential metal roofs
  • Prefabricated buildings
  • Pre-engineered steel buildings
roof ridge cap forming machine
roof ridge cap forming machine

2. Precision Forming for Different Ridge Cap Profiles

The forming section uses 18 roller stations to gradually shape the metal sheet. Each station performs part of the forming process, allowing the machine to achieve the required ridge cap geometry without applying excessive deformation at a single point.

The rollers use treated 45# steel with a polished and chrome-coated surface. Meanwhile, the forming shafts use solid 45# steel with a diameter of approximately 70 mm. The heavy-duty frame provides a stable foundation during continuous production.

metal roof ridge cap roll forming machine
metal roof ridge cap roll forming machine

The standard configuration can process 0.25–0.8 mm PPGI and GI. However, the final material range depends on the profile design, material strength, and roller tooling.

Item Standard Configuration
Machine Type Metal Roof Ridge Cap Roll Forming Machine
Application Roof Ridge Cap Production
Suitable Material PPGI, GI and similar metal coils
Material Thickness 0.25–0.8 mm
Roller Stations 18 stations
Roller Material 45# steel, polished and chrome coated
Shaft Diameter 70 mm solid shaft
Main Motor 5.5 kW
Forming Speed About 15 m/min
Drive Type Wall plate chain drive
Cutting Material Cr12 steel
Hydraulic Motor 4 kW
PLC Delta
Encoder Omron
Length Accuracy ±2 mm
Standard Voltage 380 V / 50 Hz / 3 Phase

If you manufacture different roof profiles, we can also customize the roller tooling according to your ridge cap drawing or finished sample.

3. Continuous Forming and Hydraulic Cutting

The production process begins with the decoiler, which supports the metal coil and feeds material into the forming section. Depending on the coil weight and automation requirements, customers can choose a manual, electric, or hydraulic decoiler.

The feeding device then guides the coil into the ridge cap roof panel roll forming machine. A pre-sliding cutter can also help operators prepare the material before continuous forming.

The forming rollers gradually change the flat metal sheet into the required ridge cap shape. Because the machine distributes the forming work among multiple stations, it can maintain a stable profile throughout the production process.

After forming, the hydraulic cut-off device cuts each ridge cap according to the preset length. The cutting module uses treated Cr12 steel, with a hardness of approximately HRC 58–62.

metal roof ridge capping machine
metal roof ridge capping machine

The basic production flow is:

Decoiling → Feeding → Roll Forming → Hydraulic Cutting → Product Receiving

This continuous workflow reduces unnecessary handling and allows one operator to monitor the production line through the control system.

4. PLC Control and Flexible Machine Configuration

The metal roof cap machine uses a Delta PLC together with an Omron encoder and touchscreen control system. Operators can enter production parameters directly through the control panel and monitor the forming and cutting process.

The control system supports English and Chinese interfaces. The standard electrical configuration is 380 V / 50 Hz / 3 Phase, while other voltage specifications can be customized according to the customer’s requirements.

ridge cap roof panel roll forming machine
ridge cap roof panel roll forming machine

During production, the PLC coordinates feeding, forming, length measurement, and cutting. Under suitable operating conditions, the specified cutting accuracy can reach approximately ±2 mm.

The hydraulic system powers the cutting operation. A 4 kW hydraulic motor works together with the hydraulic pump, solenoid valves, and cooling system to provide stable cutting performance.

5. Roof Ridge Production for Ghana and Global Markets

Metal roofing is widely used in industrial, commercial, agricultural, and residential construction. As a result, manufacturers need reliable equipment to produce matching ridge components efficiently.

These roof ridges making machines provide a practical way to manufacture ridge caps in-house. Instead of manually bending individual sheets, manufacturers can continuously produce standardized components from metal coils.

ridge cap roof panel roll forming machine
ridge cap roof panel roll forming machine

The machine can be configured according to different project requirements, including:

  • Ridge cap profile
  • Finished width
  • Material thickness
  • Coil width
  • Cutting length
  • Production speed
  • Electrical requirements
  • Stacking requirements

For example, when a customer needs a 300 mm ridge cap, the roller tooling can be designed according to the actual profile drawing. This approach provides better compatibility with the customer’s roofing system than using a generic profile.

The receiving table collects the finished products after cutting. For higher production requirements, an automatic roof sheet stacker can also be integrated into the line.

6. Customized Ridge Cap Roll Forming Solution

A reliable ridge cap production line should provide more than basic sheet bending. It needs to maintain profile consistency, operate smoothly, and allow operators to control production easily.

This metal roof ridge cap roll forming machine integrates an 18-station forming system, 5.5 kW main motor, hydraulic cutting, Delta PLC control, and multiple decoiler options. Therefore, it can provide an efficient production solution for roofing manufacturers in Ghana and other international markets.

More importantly, we can customize the machine according to your actual product instead of requiring you to use a fixed standard profile. Send us your ridge cap drawing, material thickness, coil width, finished dimensions, and required production speed, and our engineers can recommend the appropriate forming and cutting configuration.

metal roof cap machine
metal roof cap machine

Frequently Asked Questions

1. What materials can the metal roof ridge cap roll forming machine process?
The standard machine processes PPGI and GI sheets with a thickness of approximately 0.25–0.8 mm. Other materials can be evaluated according to their mechanical properties.

2. What is the production speed of the ridge cap machine?
The standard forming speed is approximately 15 m/min. Actual speed depends on the ridge cap profile, material thickness, cutting length, and machine configuration.

3. Can the machine produce a 300 mm ridge cap?
Yes. We can design the forming rollers according to a 300 mm ridge cap profile and the customer’s technical drawing.

4. Can you customize the metal roof ridge capping machine?
Yes. We can customize the roller tooling, feeding system, cutting specifications, decoiler, electrical system, and other components according to your production requirements.

5. What power supply does the machine require?
The standard configuration uses 380 V / 50 Hz / 3 Phase. We can customize the electrical system according to the customer’s local power supply.

Reviews

There are no reviews yet.

Be the first to review “Zhongtuo Metal Roof Ridge Cap Roll Forming Machine Roof Ridges Making Machine”

Your email address will not be published. Required fields are marked *